Evaluating And Documenting The Measurement - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

9
9.2.4

Evaluating and documenting the measurement

Sec. 9.2.1:
Preparing a mea-
surement
Displaying and editing the measurement results
You can edit the measured features immediately after capturing the measuring
points.
Further information:
Activation
Short description
1 Name of the feature
2 Axis positions of the center point
3 Feature properties and parameters
4 Features view of the measuring points and the form
178
Sec. 9.2.2: Sec. 9.2.3:
Measuring without Measuring with a
a sensor VED sensor
"Measurement evaluation", page 245
Tap Measure in the main menu
The user interface for measuring, constructing and defining
appears
Drag the feature from the feature list into the workspace
The Details dialog appears with the Overview tab selected
4
Quick Start | Conducting a measurement
Sec. 9.2.4:
Evaluating and
documenting the
measurement
2
1
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
3