Maintenance Schedule - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Service and maintenance | Maintenance schedule
16.3

Maintenance schedule

The product is largely maintenance-free.
Operating defective products
Operating defective products may result in serious consequential damage.
Do not operate or repair the product if damaged
Replace defective products immediately or contact a HEIDENHAIN service
agency
The following steps are only to be performed by electrical specialists.
Further information:
Maintenance step
Check all labels and
symbols provided on the
product for readability
Inspect electrical
connections for damage
and check their function
Check power cables for
faulty insulation and weak
points
16.4 Resuming operation
When operation is resumed, e.g. when the product is reinstalled after repair or
when it is remounted, the same measures and personnel requirements apply as
for mounting and installing the product.
Further information:
Further information:
When connecting the peripheral devices (e.g. encoders), the operating company
must ensure safe resumption of operation and assign authorized and appropriately
qualified personnel to the task.
Further information:
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
NOTICE
"Personnel qualification", page 19
Interval
Annually
Annually
Annually
"Assembly of the device", page 30
"Installation", page 37
"Obligations of the operating company", page 19
Corrective action
Contact HEIDENHAIN service
agency
Replace defective cables.
Contact HEIDENHAIN service
agency if required
Replace power cables
according to the specification
16
357