HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 146

8
Adding a network printer
146
Tap Settings in the main menu
Tap General
Tap Printers
Open in the sequence
Add printer
Network printer
Printers available on the network are detected automatically
Tap Located printers
The list of detected printers is displayed
If only one printer is connected, the printer is selected
automatically
Select a printer
Tap Located printers once again
Enter a name for the printer into the Name input field
The name of the printer must not contain slashes ("/"),
number signs ("#") or spaces
Confirm entry with RET
Enter an optional description for the printer into the
Description input field, e.g. "Color printer"
Confirm entry with RET
Enter an optional location into the Location input field, e.g.
"Office"
Confirm entry with RET
Enter the connection parameters into the Connection input
field, if they have not been entered automatically
Confirm entry with RET
Tap Select the driver
The printer can only be activated with the
assigned driver.
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Setup | Setup steps