HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 263

Measurement evaluation | Defining tolerances
Setting General tolerance ISO 2768
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
The fitting algorithm is activated
The tolerance zone of the selected general tolerance is
displayed
The tolerance zone is entered automatically
based on the specified general tolerance.
The deviation from the ideal form is displayed
Select the desired fitting algorithm
The value of the tolerance zone is shown in green if the
deviation is within the tolerance zone
The value of the tolerance zone is shown in red if the
deviation is outside the tolerance zone
Tap Roundness
The Tolerances tab is displayed
The result of the tolerance test is displayed on the tab and in
the feature list
11
263