HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 288

13
Selecting document settings
Tap the Document menu
To adjust the unit for linear measurement values, select the desired unit in the
Unit for linear values drop-down list
Millimeters: Display in millimeters
Inch: Display in inches
To reduce or increase the number of displayed Decimal places for linear
values, tap – or +
To adjust the unit for angular values, select the desired unit in the Unit for
angular values drop-down list
Decimal degrees: Display in degrees
Radian: Display as radian measure
To adjust the format for the date and time, select the desired format in the Date
and time format drop-down list
hh:mm DD-MM-YYYY: Time and date
hh:mm YYYY-MM-DD: Time and date
YYYY-MM-DD hh:mm: Date and time
Tap the Preview menu
The preview of the measurement report is displayed
288
Measurement report | Creating a measurement report
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016