Setting The Ved Measuring Tool - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Basic operation | Using measuring tools
6.6.2

Setting the VED measuring tool

You can set all functions separately for each measuring tool. The product will save
your entries when you exit the dialog.
Operating
element
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Select the desired measuring tool in the Tool palette
Tap Settings at the bottom of the workspace
The Settings dialog for the selected measuring tool opens
The available parameters depend on the selected measuring
tool
Set the parameters
Tap Close to close the Settings dialog
The selected parameters are saved for the measuring tool
Parameter
Expanded tool mode
Edge detection modes
Color
Line type
Motion reduction in
zoom
Maximum number
of points to be
measured
Distance of points to
be measured
Function
Expansion of Crosshair, Single Edge and Buffer
Crosshair: The lines of the crosshairs are extended
to the edge of the workspace. The extensions can
be used for alignment and for fine positioning with
motion reduction.
Single edge: The search range is extended with the
crosshairs. The expanded tool mode can be used
for alignment and for fine positioning with motion
reduction.
Buffer: The search range is extended with the
crosshairs. The expanded tool mode can be used for
alignment.
Modes of automatic measuring point acquisition
The active mode determines the acquisition direction
for the light-to-dark transition at an edge (dark → light;
light → dark; dark or light → light or dark).
Color of the measuring tool
Line type of the measuring tool
Function of the Crosshair measuring tool
Motion reduction of the zoom function at a ratio of
1:10 or 1:5. Selecting 1:1 deactivates the motion
reduction.
The motion reduction applies to the movement of the
zoom function in the live image.
The motion reduction in zoom is independent of the
motion reduction of the expanded tool mode.
Function of the Circle and Buffer measuring tools
Maximum number of measuring points acquired with
one entry (Enter).
Function of the Contour measuring tool
Distance between the measuring points that are
acquired with one entry (Enter).
6
85