Editing A Measuring Program - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

12
12.6

Editing a measuring program

In the program step list, you can edit the program steps of a measuring program
that is currently being recorded or that has been saved.
Opening a measuring program
12.6.1 Adding program steps
You can add work steps to an existing measuring program. To include the new
work steps in the measuring program, you need to save the measuring program
again.
278
Tap File management in the main menu
The user interface for managing the stored files and
documents appears
Navigate to the location where the program is stored, e.g.
Internal/Programs
Tap the name of the program
An overview of the program properties is displayed
Tap Open
The user interface for measuring, constructing and defining
appears
The program step list containing the program steps of the
measuring program is displayed
The selected measuring program is displayed on the program
control
In the program step list, highlight the program step after
which the new work step must be inserted
Execute the new work step
The work step is added to the program step list as a new
program step
If changes are made to a measuring program, the measuring program
needs to be saved again.
Further information: "Saving a measuring program", page 275
Programming | Editing a measuring program
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016