15
15.10.4 Resetting to the factory defaults
You can reset the settings of the product to the factory defaults, if required.
Software options are deactivated and subsequently need to be reactivated with
the available license key.
350
Tap Settings in the main menu
Tap Service
Open in the sequence
Reset to factory settings
Reset all settings
Enter password
Confirm entry with RET
To show the password in plain text, activate Show password
Tap OK to confirm the reset
Tap OK to confirm shutdown of the product
The product is shut down
All settings are reset
To restart the product, switch it off and then back on
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Settings | Service