Setup Steps; Basic Settings - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Setup | Setup steps
8.3

Setup steps

The steps for setting up the product should be performed in the sequence in which
they are described in the following sections.
Sec. 8.3.1:

Basic settings

Setting the date and time
Setting the units of measure
Entering and configuring users and
passwords
Configuring the network
Setting up a printer
8.3.1 Basic settings
Sec. 8.3.1:
Basic settings
Setting the date and time
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Sec. 8.3.2:
Configuring sensors
Adjusting the contrast settings
Determining the pixel sizes
Sec. 8.3.2:
Configuring sensors
Tap Settings in the main menu
Tap General
Tap Date and time
To set the date and time in the middle line, drag the columns
up or down
Tap Set to confirm
Select the desired format in the Date format list:
MM-DD-YYYY: Display as month, day, year
DD-MM-YYYY: Display as day, month, year
YYYY-MM-DD: Display as year, month, day
Further information: "Date and time", page 316
Sec. 8.3.3:
Setting the measuring applica-
tion
Configuring the measuring point
acquisition
Creating a template for measure-
ment reports
Creating a measuring program
Sec. 8.3.3:
Setting the measuring application
8
137