Repackaging And Storage - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Transport and storage | Repackaging and storage
3.5

Repackaging and storage

Repackage and store the product carefully in accordance with the conditions
stated below.
Repackaging
Repackaging should correspond to the original packaging as closely as possible.
Attach all mounting parts and dust protection caps to the product or repackage
them in the same way they were originally shipped from the factory.
Repackage the product such that it is protected from impact and vibration
during transit
Repackage the product such that it is protected from the ingress of dust or
humidity
Place all accessories that were included in the shipment in the original
packaging
Further information:
Include the Addendum (if it was included in the items supplied), the Installation
Instructions and the Operating Instructions
Further information:
If you return the product for repair to a service agency:
Ship the product without accessories, without measuring devices
and without peripherals
Storage of the product
Package the product as described above
Observe the specified ambient conditions
Inspect the product for damage after any transport or longer storage times
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
"Items supplied and accessories", page 24
"Storage and distribution of the documentation", page 14
3
27