HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 126

7
Setting the lighting configuration A trans.light + 4 x A refl.light + D laser
pointer
Further information:
126
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Lighting
The list of available lighting configurations is displayed
Tap A trans.light + 4 x A refl.light + D laser pointer
If necessary, tap Activate to activate an inactive lighting
Select the desired analog output in the Analog output for
transmitted light drop-down list
Select the desired analog output in the Analog output for
front segment drop-down list
Select the desired analog output in the Analog output for
rear segment drop-down list
Select the desired analog output in the Analog output for
left segment drop-down list
Select the desired analog output in the Analog output for
right segment drop-down list
Select the desired digital output in the Digital output for
laser pointer drop-down list
The lighting can now be adjusted with the lighting palette.
"Lighting", page 321
Commissioning | Commissioning steps
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016