Basic operation | Using measuring tools
6.6.3
Using VED measuring tools
Display
Crosshair
Display
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Meaning
Search range
The Single edge, Circle and Buffer measuring tools have
an edge that indicates the search range of the tool.
The edge of the Contour measuring tool indicates the end
point of measuring point acquisition.
The scan direction of the search range is indicated by an
arrow.
Handles
The handles are located on the edge or the axes of the
measuring tools.
Active handles are shown with an outline around the
handle.
The direction of motion of the active handle is indicated by
arrows next to the handle.
Activity
Relocating the crosshairs
Tap the desired position in the live
image
The crosshairs jump to the selected
position
Shifting the crosshairs
Touch a place in the live image and
drag the crosshairs to the desired
position
6
87