HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 86

6
Operating
element
86
Parameter
Number of points to
be measured
Tool size and position
Basic operation | Using measuring tools
Function
Function of the Contour measuring tool
Number of points to be measured is only taken into
account if the Distance of points to be measured
parameter is set to "0".
Number of measuring points acquired with one entry
(Enter).
Resets the measuring tool to the default size, default
alignment and default position
The default position is at the center of the camera's
field of view.
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016