Basic operation | Adjusting the lighting
Operating
element
Further information:
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Short description
Transmitted light slider for setting the light intensity for
the transmitted light.
Preset toggle switch for selecting and saving the desired
preset settings. The active preset is displayed in green.
Laser pointer operating element for switching a connected
laser pointer on and off. When the laser pointer is on, the
operating element is displayed in green.
Reflected light slider for setting the light intensity for the
reflected-light segments.
Segment switch for selecting the active reflected-light
segments. To activate all segments, select All. Active
segments are displayed in green.
"Setting the lighting", page 124
6
95