Interfaces - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Settings | Interfaces

Interfaces

15.7
Network
15.7.1
Parameter
X116
X117
X116 or X117
Contact your network administrator for the correct network settings for
configuring the product.
Parameter
MAC address
DHCP
IPv4 address
IPv4 subnet mask
IPv4 standard gateway
IPv6 SLAAC
IPv6 address
IPv6 subnet prefix length
IPv6 standard gateway
Preferred DNS server
Alternative DNS server
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Explanation
Configuration of the interface X116
Configuration of the interface X117
Explanation
Unique hardware address of the network adapter
Dynamically assigned network address of the product
Settings: ON or OFF
Default value: ON
Network address consisting of four octets
The network address is automatically assigned if DHCP is active,
or it can be entered manually
Setting range: 0.0.0.0 ... 255.255.255.255
Identifier within the network, consisting of four octets
The subnet mask is automatically assigned if DHCP is active, or
it can be entered manually.
Setting range: 0.0.0.0 ... 255.255.255.255
Default value: 0.0.0.0
Network address of the router connecting a network
The network address is automatically assigned if
DHCP is active, or it can be entered manually
Setting range: 0.0.0.0 ... 255.255.255.255
Network address with extended namespace
Only required if supported in the network
Settings: ON or OFF
Default value: OFF
Automatically assigned if IPv6 SLAAC is active
Subnet prefix in IPv6 networks
Network address of the router connecting a network
Primary server for mapping the IP address
Optional server for mapping the IP address
15
333