1
1.7
Symbols and fonts used for marking text
In these instructions the following symbols and fonts are used for marking text:
Format
...
...
...
...
Bold
16
Meaning
identifies an action and the result of this action
Example:
Tap Finish in the feature
The measured contour is shown in green
identifies an item of a list
Example:
identifies menus, tabs and buttons as well as geometry
features, functions and parameters.
Example:
Select Manual measuring
Select Circle
Fundamentals | Symbols and fonts used for marking text
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016