10
10.5.2
Constructing a feature
238
Tap Measure in the main menu
Select Construct in the function palette
Select the desired geometry in the geometry palette,
e.g. Distance
Select the required parent features in the feature list
The selected features are displayed in green
A new feature with the selected geometry is displayed
Tap Finish in the new feature
If a feature cannot be concluded, the
construction must be checked to ensure that the
parent features used are permitted.
The constructed feature is displayed in the workspace and
the feature list
Measurement | Constructing features
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016