Using The Inspector; Operating Elements Of The Inspector; Function Elements - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

6
6.11

Using the Inspector

The Inspector is only available in the Measure menu.
Activation
6.11.1

Operating elements of the Inspector

The Inspector contains the following areas and operating elements:
Operating
element
6.11.2

Function elements

Function elements are operating elements that you can add to the Inspector and
configure individually.
The following function elements are available:
Function element
68
Tap Measure in the main menu
The user interface for measuring and positioning appears
Short description
Quick access menu
The quick access menu displays the current settings:
Unit for linear values (Millimeters or Inch)
Unit for angular values (Radian, Decimal degrees, or
Deg-Min-Sec)
To adjust the settings of the quick access menu, tap the
quick access menu
Further information: "Adjusting settings in the quick
access menu", Page 69
Short description
Presets
Display of the current preset; tapping opens the preset
table
Further information: "Activating the preset", Page 140
Calculator
Tapping opens a calculator with basic mathematical
functions, the last result is shown in the calculator and the
Inspector
Reference mark search (REF)
Tapping starts the reference mark search
MinMax
Captures the minimum, maximum, and range; tapping
starts the capture of measured values according to the
configuration
Further information: "Capturing the minimum, maximum,
and range", Page 144
Basic operation | Using the Inspector
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018