HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 92

6
Contour
Display
92
Basic operation | Using measuring tools
Activity
Relocating the contour
Tap the desired position in the live
image
The contour jumps to the selected
position
Shifting the contour
Touch a place in the live image and
drag the contour to the desired
position
Aligning the contour
Touch a handle of the contour and
drag the contour to the desired
orientation
Resizing the contour
Touch a handle of the contour and
drag the contour to the desired size
The contour is changed along the
axis at an equal distance from the
center
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016