HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 123

Commissioning | Commissioning steps
Adding a magnification
Further information:
Removing magnifications
Magnifications that are no longer needed can be removed from the list.
Only inactive magnifications can be removed.
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Magnifications
Set a magnification in the camera system, e.g. 2.0
Tap Add
Tap the Description input field
Enter a description for the magnification you have set
Confirm entry with RET
Tap the Acronym for quick access menu input field
Enter a meaningful acronym
Confirm entry with RET
The acronym is needed for selecting the magnification in the
quick access menu of the Inspector
Tap Add
The new magnification appears in the magnification list
"Magnifications", page 320
Tap Measure in the main menu
Tap the quick access menu in the Inspector
Select a magnification that is not to be deleted
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Magnifications
The active magnification is indicated by a check mark
Tap the inactive magnification that you want to remove
Tap Remove
To confirm the removal, tap Remove in the dialog
The magnification is removed from the magnification list
7
123