Switch-On/Switch-Off; Switch-On; Activating And Deactivating The Energy-Saving Mode - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

6
6.8

Switch-on/Switch-off

6.8.1

Switch-on

Turn the power switch on
The power switch is on the rear side of the unit
The unit powers up. This can take a moment
If automatic user login is active, the user interface is displayed in the Measure
menu
Further information:
If automatic user login is not active, the User login menu is displayed
Further information:
6.8.2

Activating and deactivating the energy-saving mode

If you will not be using the unit for a while, you should activate the energy-saving
mode. This switches the unit to an inactive state without interrupting the power
supply. The screen is switched off in this state.
Activating energy-saving mode
Deactivating energy-saving mode
96
Before using the product, you need to perform the commissioning
and setup steps. Depending on the purpose of use, you may have to
configure additional setup parameters.
Further information: "Commissioning", page 103
"Measure menu", page 64
"User login and logout", page 98
Tap Switch off in the main menu
Tap Energy-saving mode
The screen switches off
Tap anywhere on the touchscreen
An arrow appears at the bottom of the screen
Drag the Arrow up
The screen is switched on and shows the user interface last
displayed
Basic operation | Switch-on/Switch-off
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016