Overview - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

18
18.1

Overview

This chapter provides information about the removal and disposal of the product.
This information includes requirements to be complied with in respect of
environmental-protection laws.
18.2 Removal
Depending on the connected peripherals, the removal may need to be performed
by an electrical specialist.
In addition, the same safety precautions that apply to the mounting and installation
of the respective components must be taken.
Removing the product
To remove the product, follow the installation and mounting steps in the reverse
order.
Further information:
Further information:
18.3 Disposal
If you have any questions about the disposal of the product, please contact a
HEIDENHAIN service agency
364
Removal of the product must be performed only by qualified personnel.
Further information: "Personnel qualification", page 19
"Installation", page 37
"Mounting", page 29
Incorrect disposal of the product!
Incorrect disposal of the product can cause environmental
damage.
Do not dispose of electrical waste and electronic components
in domestic waste
Forward the product to recycling in accordance with the
applicable local disposal regulations
NOTICE
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Removal and disposal | Overview