Creating A Measurement Report - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

13
13.3

Creating a measurement report

You can create a measurement report in five steps:
Selecting a template
Selecting features
Entering information on the measuring task
Selecting document settings
Saving, printing or exporting the measurement report
Requirement
The measurement and the measurement evaluation are complete
Selecting the template and features
286
Tap Measurement report in the main menu
The user interface for editing the measurement reports
appears
Select a template, e.g. Standard
The preview of the selected template is displayed
Tap Create to create the measurement report
The Features menu appears with a list of all features that
have been measured, constructed and defined
The feature list can be filtered by criteria.
Further information:
page 290
Tap a feature to add it to the measurement report
Selected features are displayed in green in the list and in the
features preview
To add all features to the measurement report, tap Select all
in the Select drop-down list
All features in the list and in the features preview are
activated and displayed in green
Measurement report | Creating a measurement report
"Filtering features",
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016