HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 147

Setup | Setup steps
Further information:
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Select the appropriate driver for the printer
If the appropriate driver is not listed, it needs to be copied to
the product
The printer manufacturer usually provides the
appropriate driver.
To copy a custom driver to the product, tap Select PPD file
Tap Select file
To navigate to the desired PPD file, tap the location where
the file is stored
Navigate to the folder containing the PPD file
Select PPD file
Tap OK
The PPD file is copied to the product
You can only use drivers that are supported by
Linux. Drivers for other operating systems are
not recognized.
Tap Continue
The driver is activated
Tap Close in the message
Tap Set standard values
Tap Resolution to set the printer resolution
Select the desired resolution
Tap Resolution once again
Tap Paper size to set the paper size
Select the desired paper size
The resolution and the paper size are saved as defaults
The printer is added and can be used
"Printers", page 315
8
147