How To Enter And Exit Programming Mode; Entering Programming Mode - NEC univerge sv8100 Installation Manual

UNIVERGE SV8100
H
S 4
OW TO
ECTION
4.1
Password
12345678
ACD Installation Manual
E
NTER AND

Entering Programming Mode

To enter programming mode:
1. Go to any working display telephone.
 In a newly installed system, use extension 101 (port 1).
2. Do not lift the handset.
3. Press Speaker.
4. # * # *
Password
5. Dial the system password + Transfer.
 Refer to the following table for the default system passwords. To change the
passwords, use Program 90-02-01.
User
Name
47544 necii 1 (MF)
tech
0000 ADMIN1 3 (SA)
9999 ADMIN2 4 (SB)
E P
XIT ROGRAMMING
Level
All programs
2 (IN) All programs in this section not listed below for SA and SB
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17,
10-18, 10-22, 12-02, 12-03, 12-04, 15-01, 15-07, 15-09,
15-10, 15-11, 20-16, 21-07, 21-14, 22-04, 22-11, 25-08,
30-03, 32-02, 40-02, 41-02, 41-03, 41-04, 41-05, 41-06,
41-07, 41-08, 41-09, 41-10, 41-11, 41-12, 41-13, 41-14,
41-15, 41-16, 41-17, 41-18, 90-03, 90-04, 90-06, 90-07,
90-18,
90-19
13-04, 13-05, 13-06
M
ODE
Programs at this Level
Issue 4.0
4 - 3