NEC univerge sv8100 Installation Manual page 109

UNIVERGE SV8100
Overflow Overflow
ACD Mode Dest.
(41-08-01) (41-08-02)
62
63
64
Programming


ACD Installation Manual
Overflow Destination Priority
(41-14-03)
1 2 3 4
Conditions

The queue Announcements will not play to a caller when agents are
available and ringing.

After recording the VRS overflow message, the VRS may have to be
reset before the message will be played.

In-Mail can be used to play Delay Announcements.

When all In-Mail talk paths (ports) are simultaneously being accessed by
an In-Mail Mailbox subscribers or Voice Mail Delay Announcements, or
combination of the two, the next incoming call to the In-Mail will Ring No
Answer until an available talk path becomes idle (First Come – First
Served).
Default Setting

ACD not set up.
15-07-01 Programmable Function Keys
Define a key for ACD Supervisors and ACD Group Supervisors which will
allow the overflow group to be temporarily overridden. The ACD Overflow
Control key (Program 15-07-01 or SC 752: *18) is programmed with the
ACD group number to which the calls should overflow. Multiple keys can be
programmed, each with a different ACD group.
22-01-11 System Options for Incoming Calls – VRS Waiting Message Interval
Time
For each ACD group (01~64), set the timer for the interval between the
Delayed Messages (0~64800 seconds).
1st ACD
Announcement
Type
5 6 7
(41-08-03)
2nd ACD
Announcement
Source
Type
(41-10-01)
(41-11-02)
(41-08-03)
(41-19-02)
Issue 4.0
Source
(41-10-02)
(41-11-04)
(41-19-04)
3 - 77