Programming System Speed Dial; Clock/Calendar Setting - NEC Xen IPK II User Manual

Programming System Speed Dial

To store a System or Group Speed Dialling number:
Press Speaker
Dial 753 (for system) or 754 (for group)
Dial system or group speed dial buffer number
Note: At default, there are 1000 System Speed Dialling codes (000~999).
There are Group Speed Dialling codes only if assigned in programming.
Dial the Trunk Access Code (e.g., 0) – if required
Dial telephone number you want to store (up to 24 digits)
Note: Valid entries are 0~9, # and . To enter a pause, press MIC. To enter a
Flash, press Recall.
Press Hold
Enter the name associated with the Speed Dialling number (display
telephones only). Refer to the Character Entry Table later in this guide.
Press Hold
Press Speaker

Clock/Calendar Setting

To set the system time:
Press Speaker
Dial 728
Dial two digits for the hour (24 hour clock, 13 = 1:00 pm)
Dial two digits for the minutes (00~59)
Press Speaker
Note: The date must be set in system programming (10-01).
12