Programming System Speed Dial - NEC Electra Elite IPK II User Manual

PROGRAMMING SYSTEM SPEED DIAL

To store a System or Group Speed Dialing number:
1. Press the Speaker key.
2. Dial 753 (for system) or 754 (for group).
3. Dial system or group storage code.
Note:
4. Dial the Access Code (e.g., 9) - if required.
5. Dial telephone number you want to store (up to 24 digits).
Note:
6. Press Hold.
7. Enter the name associated with the Speed Dialing number (display
telephones only):
Use this
keypad
digit . . .
1
2 Enter characters A-C, a-c, 2
3 Enter characters D-F, d-f, 3
4 Enter characters G-I, g-i, 4
5 Enter characters J-L, j-l, 5
6 Enter characters M-O, m-o, 6
7 Enter characters P-S, p-s, 7
8 Enter characters T-V, t-v, 8
9 Enter characters W-Z, w-z, 9
0
Initially (Default), there are 1000 System Speed Dialing codes
(000~999). There are Group Speed Dialing codes only if
assigned in programming.
Valid entries are 0~9, # and *. To enter a pause, press MIC. To
store a Flash, press Recall.
Key for Entering Names
When you want to. . .
13