Chapter 41 Mac Notification Command List - D-Link DGS-1510/ME Series Reference Manual

Chapter 41 MAC Notification Command List

enable mac_notification
disable mac_notification
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}
config mac_notification ports [<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports {<portlist>}
41-1 enable mac_notification
Description
This command is used to enable global MAC address table notification on the Switch.
Format
enable mac_notification
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable MAC notification function:
DGS-1510-28XMP/ME:admin# enable mac_notification
Command: enable mac_notification
Success.
DGS-1510-28XMP/ME:admin#
41-2 disable mac_notification
Description
This command is used to disable global MAC address table notification on the Switch.
Format
disable mac_notification
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
347