D-Link DGS-1510/ME Series Reference Manual page 136

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
file - Specifies to display the configuration file.
<pathname 64> - Enter an absolute pathname on the device file system. If pathname is not specified, the boot
up configuration is implied. This name can be up to 64 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) Specifies the first line that contains the specified filter string will be the first line of the output.
<filter_string 80> - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself cannot contain
the " character. The filter string is case sensitive. This value can be up to 80 characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself
cannot contain the " character. The filter string is case sensitive. This value can be up to 80 characters
long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string
itself cannot contain the " character. The filter string is case sensitive. This value can be up to 80
characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) Specifies the first line that contains the specified filter string will be the first line of the output.
<filter_string 80> - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself cannot
contain the " character. The filter string is case sensitive. This value can be up to 80 characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string
itself cannot contain the " character. The filter string is case sensitive. This value can be up to 80
characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter
string itself cannot contain the " character. The filter string is case sensitive. This value can be up
to 80 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) Specifies the first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself
cannot contain the " character. The filter string is case sensitive. This value can be up to 80
characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter
string itself cannot contain the " character. The filter string is case sensitive. This value can be up
to 80 characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter
string itself cannot contain the " character. The filter string is case sensitive.
Restrictions
Only Administrators can issue this command.
Example
The following example illustrates how the special filters, 'modified', affect the configuration display:
132