D-Link DGS-1510/ME Series Reference Manual page 390

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config mld_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr> [add | delete]
<portlist>
Parameters
vlan - Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - Enter the multicast group IPv6 address.
add - Specifies to add the member ports.
delete - Specifies to delete the member ports.
<portlist> - Specifies a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To unset port range 9-10 from MLD snooping static member ports for group FF1E::1 on default VLAN:
DGS-1510-28XMP/ME:admin# config mld_snooping static_group vlan default FF1E::1 delete
9-10
Command: config mld_snooping static_group vlan default FF1E::1 delete 9-10
Success.
DGS-1510-28XMP/ME:admin#
45-14 show mld_snooping static_group
Description
This command used to display the MLD snooping multicast group static members.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan - (Optional) Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - (Optional) Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - (Optional) Enter the multicast group IPv6 address.
386