D-Link DGS-1510/ME Series Reference Manual page 264

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin#config router_ports_forbidden default add 11-12
Command: config router_ports_forbidden default add 11-12
Success.
DGS-1510-28XMP/ME:admin#
31-7 enable igmp_snooping
Description
This command is used to enable IGMP snooping on the Switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable IGMP snooping on the Switch:
DGS-1510-28XMP/ME:admin# enable igmp_snooping
Command: enable igmp_snooping
Success.
DGS-1510-28XMP/ME:admin#
31-8 disable igmp_snooping
Description
This command is used to disable IGMP snooping on the Switch. Disabling IGMP snooping allows all IGMP and IP
multicast traffic to flood within a given IP interface.
Format
disable igmp_snooping
Parameters
None.
260