D-Link DGS-1510/ME Series Reference Manual page 427

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# enable stp
Command: enable stp
Success.
DGS-1510-28XMP/ME:admin#
49-2 disable stp
Description
This command is used to disable STP globally.
Format
disable stp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable STP:
DGS-1510-28XMP/ME:admin# disable stp
Command: disable stp
Success.
DGS-1510-28XMP/ME:admin#
49-3 config stp
Description
This command is used to configure the bridge parameters global settings.
Format
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> | forwarddelay <value 4-
30> | txholdcount <value 1-10> | fbpdu [enable | disable] | nni_bpdu_addr [dot1d | dot1ad]}
Parameters
maxage - (Optional) Specifies to determine if a BPDU is valid. The default value is 20.
<value 6-40> - Enter the maximum age value here. This value must be between 6-40.
maxhops - (Optional) Specifies to restrict the forwarded times of one BPDU. The default value is 20.
423