D-Link DGS-1510/ME Series Reference Manual page 63

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
local_enable - (Optional) Specifies authentication by local enable password in device.
none - (Optional) Specifies that there is no authentication.
Restrictions
Only Administrators can issue this command.
Example
To configure a user-defined method list for promoting user's privilege to Admin level:
DGS-1510-28XMP/ME:admin# config authen_enable method_list_name enable_list_1 method tacacs+
tacacs local_enable
Command: config authen_ enable method_list_name enable_list_1 method tacacs+ tacacs
local_enable
Success.
DGS-1510-28XMP/ME:admin#
5-12 delete authen_enable
Description
This command is used to delete a user-defined method list of authentication methods for promoting user's privilege
to Admin level.
Format
delete authen_enable method_list_name <string 15>
Parameters
<string 15> - Enter the user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrators can issue this command.
Example
To delete a user-defined method list for promoting user's privilege to Admin level:
DGS-1510-28XMP/ME:admin# delete authen_enable method_list_name enable_list_1
Command: delete authen_enable method_list_name enable_list_1
Success.
DGS-1510-28XMP/ME:admin#
59