D-Link DGS-1510/ME Series Reference Manual page 184

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
19-2 config dhcp_local_relay vlan vlanid
Description
This command is used to enable or disable DHCP local relay function for specified VLAN ID.
Format
config dhcp_local_relay vlan vlanid <vlan_id> state [enable | disable]
Parameters
vlanid - Specifies the VLAN ID that the DHCP local relay function will be enabled.
<vlan_id> - Enter the VLAN ID used here.
state - Specifies to enable or disable DHCP local relay for specified VLAN.
enable - Specifies that the DHCP local relay function will be enabled.
disable - Specifies that the DHCP local relay function will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable DHCP local relay for default VLAN:
DGS-1510-28XMP/ME:admin# config dhcp_local_relay vlan vlanid 1 state enable
Command: config dhcp_local_relay vlan vlanid 1 state enable
Success.
DGS-1510-28XMP/ME:admin#
19-3 config dhcp_local_relay option_82 circuit_id
Description
This command is used to configure the circuit id of DHCP relay agent information option 82 of the switch.
Format
config dhcp_local_relay option_82 circuit_id [default | vendor1]
Parameters
default – Specifies the circuit id of DHCP relay agent to default.
vendor1 - Specifies the circuit id of DHCP relay agent to vendor1.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
180