D-Link DGS-1510/ME Series Reference Manual page 440

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To delete the NLB unicast FDB entry, for the product that support the VLAN information on the unicast forwarding:
DGS-1510-28XMP/ME:admin# delete nlb unicast_fdb 02-bf-01-01-01-01
Command: delete nlb unicast_fdb 02-BF-01-01-01-01
Success.
DGS-1510-28XMP/ME:admin#
50-4 create nlb multicast_fdb
Description
This command is used to create a NLB multicast FDB entry.
The NLB multicast FDB entry will be mutual exclusive with the L2 multicast entry.
Format
create nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr>
Parameters
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - Specifies the VLAN by the VLAN ID.
<vlanid> - Enter the VLAN ID here.
<macaddr> - Enter the MAC address of the NLB multicast FDB entry to be created.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a NLB multicast FDB entry:
DGS-1510-28XMP/ME:admin# create nlb multicast_fdb default 03-bf-01-01-01-01
Command: create nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DGS-1510-28XMP/ME:admin#
50-5 config nlb multicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB multicast FDB entry.
Format
config nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr> [add | delete] <portlist>
436