D-Link DGS-1510/ME Series Reference Manual page 491

Chapter 60 Quality of Service (QoS) Command
config bandwidth_control [<portlist> | all] {rx_rate [no_limit | <value 64-10240000>] | tx_rate [ no_limit | <value
64-10240000>]}
show bandwidth_control {<portlist>}
config per_queue bandwidth_control {ports [<portlist> | all ]} <cos_id_list 0-7> {{min_rate [no_limit | <value 64-
10240000>]} max_rate [no_limit | <value 64-10240000>]}(1)
show per_queue bandwidth_control {<portlist>}
config scheduling {ports [<portlist> | all]} <class_id 0-7> [strict | weight <value 1-127>]
config scheduling_mechanism {ports [<portlist> | all]} [strict | wrr]
show scheduling {<portlist>}
show scheduling_mechanism {<portlist>}
config 802.1p user_priority <priority 0-7> <class_id 0-7>
show 802.1p user_priority
config 802.1p default_priority [<portlist> | all] <priority 0-7>
show 802.1p default_priority {<portlist>}
enable hol_prevention
disable hol_prevention
show hol_prevention
config 802.1p map {[<portlist> | all]} 1p_color <priority_list> to [green | red | yellow]
show 802.1p map 1p_color {<portlist>}
config dscp trust [<portlist> | all] state [enable | disable]
show dscp trust {<portlist>}
config dscp map {[<portlist> | all]} [dscp_priority <dscp_list> to <priority 0-7> | dscp_dscp <dscp_list> to <dscp 0-
63> | dscp_color <dscp_list> to [green | red | yellow]]
show dscp map {<portlist>} [dscp_priority | dscp_dscp | dscp_color] {dscp <dscp_list>}
60-1 config bandwidth_control
Description
This command is used to configure the port bandwidth limit control.
Format
config bandwidth_control [<portlist> | all] {rx_rate [no_limit | <value 64-10240000>] | tx_rate [ no_limit |
<value 64-10240000>]}
Parameters
<portlist> - Enter a range of ports to be configured.
all - Specifies that all the ports will be used for this configuration.
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
List
487