D-Link DGS-1510/ME Series Reference Manual page 370

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To enable trap state of MAC-based Access Control:
DGS-1510-28XMP/ME:admin# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DGS-1510-28XMP/ME:admin#
42-19 config mac_based_access_control log state
Description
This command is used to enable or disable generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
enable - Specifies to enable log for MAC-based Access Control. The log of MAC-based Access Control will be
generated.
disable - Specifies to disable log for MAC-based Access Control.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable log state of MAC-based Access Control:
DGS-1510-28XMP/ME:admin# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
DGS-1510-28XMP/ME:admin#
366