D-Link DGS-1510/ME Series Reference Manual page 267

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config igmp_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr> [add | delete]
<portlist>
Parameters
vlan - Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Enter the multicast group IP address (for Layer 3 switch).
add - Specifies to add the member ports.
delete - Specifies to delete the member ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To unset port range 9-10 from IGMP snooping static member ports for group 239.1.1.1 on default VLAN:
DGS-1510-28XMP/ME:admin#config igmp_snooping static_group vlan default 239.1.1.1 delete 9-10
Command: config igmp_snooping static_group vlan default 239.1.1.1 delete 9-10
Success.
DGS-1510-28XMP/ME:admin#
31-12 show igmp_snooping static_group
Description
This command is used to display the IGMP snooping multicast group static members.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan - (Optional) Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - (Optional) Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - (Optional) Enter the multicast group IP address.
263