Chapter 48 Multicast Vlan Command List - D-Link DGS-1510/ME Series Reference Manual

Chapter 48 Multicast VLAN Command List

create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7> | none]
{replace_priority}}
config igmp_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port <portlist> | [source_port
<portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] | state [enable|disable] |
replace_source_ip <ipaddr> | remap_priority [<value 0-7> | none] {replace_priority}}(1)
create igmp_snooping multicast_vlan_group_profile <profile_name 1-32>
config igmp_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcast_address_list>
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
show igmp_snooping multicast_vlan_group_profile {< profile_name 1-32>}
config igmp_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name <profile_name 1-
32>
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
delete igmp_snooping multicast_vlan <vlan_name 32>
enable igmp_snooping multicast_vlan
disable igmp_snooping multicast_vlan
config igmp_snooping multicast_vlan forward_unmatched [enable | disable]
show igmp_snooping multicast_vlan {<vlan_name 32>}
48-1 create igmp_snooping multicast_vlan
Description
This command is used to create a multicast VLAN and implements relevant parameters as specified. More than
one multicast VLANs can be configured. The maximum number of configurable VLANs is 5.
Newly created IGMP snooping multicast VLANs must use a unique VLAN ID and name, i.e. they cannot use the
VLAN ID or name of any existing 802.1q VLAN.
Also keep in mind the following conditions:
•
Multicast VLANs cannot be configured or displayed using 802.1Q VLAN commands.
•
An IP interface cannot be bound to a multicast VLAN.
•
The multicast VLAN snooping function co-exists with the 802.1q VLAN snooping function.
Format
create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7> | none]
{replace_priority}}
Parameters
<vlan_name 32> - Enter the multicast VLAN here. The VLAN name can be up to 32 characters long.
<vlanid 2-4094> - Enter the VLAN ID of the multicast VLAN to be created. This value must be between 2 and
4094.
remap_priority - (Optional) Specifies the remap priority (0 to 7) to be associated with the data traffic to be
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
412