D-Link DGS-1510/ME Series Reference Manual page 329

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# show lldp ports 1
Command: show lldp ports 1
Port ID
-----------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
10.90.90.90
Port VLAN ID
Enabled Port_and_Protocol_VLAN_ID
1, 2, 3
Enabled VLAN Name
1-3
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
DGS-1510-28XMP/ME:admin#
38-10 show lldp local_ports
Description
This command is used to display the per-port information currently available for populating outbound LLDP
advertisements.
Format
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specifies a range of ports to be configured. When port list is not specified, information for
all ports will be displayed.
mode - (Optional) Specifies the display mode.
brief - Specifies to display the information in brief mode.
normal - Specifies to display the information in normal mode. This is the default display mode.
detailed - Specifies to display the information in detailed mode.
Restrictions
None.
: 1
: TX_and_RX
: Enabled
:
Disabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
325