Chapter 80 Vlan Trunking Command List - D-Link DGS-1510/ME Series Reference Manual

Chapter 80 VLAN Trunking Command List

enable vlan_trunk
disable vlan_trunk
config vlan_trunk ports [<portlist> | all] | state [enable | disable]
show vlan_trunk
80-1 enable vlan_trunk
Description
This command is used to enable the VLAN trunk function. When the VLAN trunk function is enabled, the VLAN
trunk ports shall be able to forward all tagged frames with any VID.
Format
enable vlan_trunk
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the VLAN Trunk:
DGS-1510-28XMP/ME:admin# enable vlan_trunk
Command: enable vlan_trunk
Success.
DGS-1510-28XMP/ME:admin#
80-2 disable vlan_trunk
Description
This command is used to disable the VLAN trunk function.
Format
disable vlan_trunk
Parameters
None.
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
625