D-Link DGS-1510/ME Series Reference Manual page 98

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To clear the ARP table:
DGS-1510-28XMP/ME:admin# clear arptable
Command: clear arptable
Success.
DGS-1510-28XMP/ME:admin#
7-6 show arpentry
Description
This command is used to displays the ARP table. You can filter the display by IP address, MAC address, Interface
name, or static entries.
Format
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address <macaddr>}
Parameters
ipif - (Optional) Specifies the name of the IP interface the end node or station for which the ARP table entry was
made, resides on.
<ipif_name 12> - Enter the IP interface name here. This value can be up to 12 characters long.
ipaddress - (Optional) Specifies the IP address of the end node or station.
<ipaddr> - Enter the IP address here.
static - (Optional) Specifies to display the static entries in the ARP table.
mac_address - (Optional) Specifies to display the ARP entry by MAC address.
<macaddr> - Enter the MAC address here.
Restrictions
None.
Example
To display the ARP table:
94