D-Link DGS-1510/ME Series Reference Manual page 262

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
31-4 config igmp access_authentication ports
Description
This command is used to enable or disable the IGMP Access Control function for the specified ports. If the IGMP
Access Control function is enabled and the Switch receives an IGMP JOIN message, the Switch will send the
access request to the RADIUS server for authentication.
Format
config igmp access_authentication ports [all | <portlist>] state [enable | disable]
Parameters
all - Specifies all ports to be configured.
<portlist> - Specifies a range of ports to be configured.
state - Specifies the state of the RADIUS authentication function on the specified ports.
enable - Specifies to enable the RADIUS authentication function on the specified ports.
disable - Specifies to disable the RADIUS authentication function on the specified ports.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable IGMP Access Control for all ports:
DGS-1510-28XMP/ME:admin#config igmp access_authentication ports all state enable
Command: config igmp access_authentication ports all state enable
Success.
DGS-1510-28XMP/ME:admin#
31-5 config router_ports
Description
This command is used to designate a range of ports as being connected to multicast-enabled routers. This will
ensure that all packets with such a router as its destination will reach the multicast-enabled router, regardless of
protocol, etc.
Format
config router_ports [<vlan_name 32> | vlanid <vlanid_list> ] [add | delete] <portlist>
Parameters
<vlan_name 32> - Specifies the name of the VLAN on which the router port resides.
vlanid - Specifies the ID of the VLAN on which the router port resides.
258