D-Link DGS-1510/ME Series Reference Manual page 249

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# dir
Command: dir
Directory of / c:
Idx Info Attr Size
--- ------- ---- -------- ------------------- ----------------
1 drw- 0
2 CFG(*) -rw- 29661
3 RUN(*) -rw- 4879040
4 d--- 0
29618 KB total (24727 KB free)
(*) -with boot up info
DGS-1510-28XMP/ME:admin# del 12 recursive
Command: del 12 recursive
Success.
DGS-1510-28XMP/ME:admin# dir
Command: dir
Directory of / c:
Idx Info Attr Size
--- ------- ---- -------- ------------------- ----------------
1 CFG(*) -rw- 29661
2 RUN(*) -rw- 4879040
3 d--- 0
29618 KB total (24727 KB free)
(*) -with boot up info
DGS-1510-28XMP/ME:admin#
29-8 erase
Description
This command is used to delete a file stored in the file system.
System will prompt if the target file is a FW or configuration whose type is boot up.
Format
erase {<drive_id>} <pathname>
Parameters
<drive_id> - (Optional) Enter the drive ID used, for example, C:.
<pathname> - Enter the file to be deleted. If it is specified in the associated form, then it is related to the current
directory.
Update Time
2000/04/02 06:02:04 12
2000/04/01 05:54:38 config.cfg
2000/03/26 03:15:11 B019.had
2000/04/01 05:17:36 system
(b) -with backup info
Update Time
2000/04/01 05:54:38 config.cfg
2000/03/26 03:15:11 B019.had
2000/04/01 05:17:36 system
(b) -with backup info
245
Name
Name