D-Link DGS-1510/ME Series Reference Manual page 520

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To configure CPU protection:
DGS-1510-28XMP/ME:admin# config safeguard_engine state enable utilization rising 50 falling
30 trap_log enable
Command: config safeguard_engine state enable utilization rising 50 falling 30 trap_log
enable
Success.
DGS-1510-28XMP/ME:admin#
62-2 show safeguard_engine
Description
This command is used to show safeguard engine information.
Format
show safeguard_engine
Parameters
None.
Restrictions
None.
Example
To show safeguard engine information:
DGS-1510-28XMP/ME:admin# show safeguard_engine
Command: show safeguard_engine
Safeguard Engine State
Safeguard Engine Current Status :
=======================================================
CPU Utilization Information:
Rising Threshold
Falling Threshold :
Trap/Log State
Mode
DGS-1510-28XMP/ME:admin#
NOTE: Safeguard engine current status has two modes: exhausted and normal mode.
: Disabled
Normal Mode
: 30%
20%
: Disabled
: Fuzzy
516