D-Link DGS-1510/ME Series Reference Manual page 530

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# download ssl certificate 10.55.47.1 certfilename cert.der
keyfilename pkey.der
Command: download ssl certificate 10.55.47.1 certfilename cert.der keyfilename pkey.der
Success.
DGS-1510-28XMP/ME:admin#
64-2 enable ssl
Description
This command is used to enable SSL status and it's cipher suites. The enable ssl command will enable both
SSLv3 and TLSv1. For each cipher suites, user must specify it by this command.
NOTE: Web will be disabled when SSL is enabled.
Format
enable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}}
Parameters
ciphersuite - (Optional) Specifies the cipher suite combination used for this configuration.
RSA_with_RC4_128_MD5 - (Optional) Specifies RSA key exchange with RC4 128 bits encryption and MD5
hash.
RSA_with_3DES_EDE_CBC_SHA - (Optional) Specifies RSA key exchange with 3DES_EDE_CBC
encryption and SHA hash.
DHE_DSS_with_3DES_EDE_CBC_SHA - (Optional) Specifies DH key exchange with 3DES_EDE_CBC
encryption and SHA hash.
RSA_EXPORT_with_RC4_40_MD5 - (Optional) Specifies RSA_EXPORT key exchange with RC4 40 bits
encryption and MD5 hash.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-1510-28XMP/ME:admin# enable ssl ciphersuite RSA_with_RC4_128_MD5
Command: enable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
DGS-1510-28XMP/ME:admin#
526