D-Link DGS-1510/ME Series Reference Manual page 219

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
24-4 config dos_prevention log
Description
This command is used to enable or disable dos prevention log state.
Format
config dos_prevention log [enable | disable]
Parameters
enable - Specifies to enable DoS prevention log state.
disable - Specifies to disable DoS prevention log state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable DoS prevention log:
DGS-1510-28XMP/ME:admin# config dos_prevention log enable
Command: config dos_prevention log enable
Success.
DGS-1510-28XMP/ME:admin#
215