D-Link DGS-1510/ME Series Reference Manual page 270

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config igmp_snooping data_driven_learning max_learned_entry 50
Command: config igmp_snooping data_driven_learning max_learned_entry 50
Success.
DGS-1510-28XMP/ME:admin#
31-15 clear igmp_snooping data_driven_group
Description
This command is used to delete the IGMP snooping group(s) learned by data driven.
Format
clear igmp_snooping data_driven_group [all | [vlan_name <vlan_name> | vlanid <vlanid_list>] [<ipaddr> |
all]]
Parameters
all - Specifies all VLANs to which IGMP snooping groups will be deleted.
vlan_name - Specifies the VLAN name.
<vlan_name> - Enter the VLAN name here.
vlanid - Specifies the VLAN ID.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Specifies the group's IP address learned by data driven.
all - Specifies to delete all IGMP snooping groups of specified VLANs.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete all the groups learned by data-driven:
DGS-1510-28XMP/ME:admin# clear igmp_snooping data_driven_group all
Command: clear igmp_snooping data_driven_group all
Success.
DGS-1510-28XMP/ME:admin#
31-16 show igmp_snooping
Description
This command is used to display the current IGMP snooping configuration on the Switch.
266