D-Link DGS-1510/ME Series Reference Manual page 263

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
<vlanid_list> - Enter the VLAN ID here.
add - Specifies to add the router ports.
delete - Specifies to delete the router ports.
<portlist> - Specifies a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set up static router ports:
DGS-1510-28XMP/ME:admin#config router_ports default add 1-10
Command: config router_ports default add 1-10
Success.
DGS-1510-28XMP/ME:admin#
31-6 config router_ports_forbidden
Description
This command is used to designate a range of ports as being not connected to multicast-enabled routers. This
ensures that the forbidden router port will not propagate routing packets out.
Format
config router_ports_forbidden [ <vlan_name 32> | vlanid <vlanid_list> ] [add | delete] <portlist>
Parameters
<vlan_name 32> - Specifies the name of the VLAN on which the router port resides.
vlanid - Specifies the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
add - Specifies to add the router ports.
delete - Specifies to delete the router ports.
<portlist> - Specifies a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set up port range 1-10 to forbidden router ports of default VLAN:
259